[m]
Meters — This is an entry and conver-
sion key used to enter decimal meters
or, when used with [Conv], to convert
to decimal meters from some other
dimensional format.
[mm]
Millimeters — This is an entry and
conversion key used to enter decimal
millimeters or, when used with [Conv],
to convert to decimal millimeters fro m
another dimensional form a t .
[Weight]
This key is used to convert a dimen-
sioned cubic value or volume to a
weight value using the [Conv] key and
the stored Weight per Volume (see
below). For example, 5 [Cu] [Yds]
[Conv] [Weight] equals 7.5 tons, or 10
[ We i g h t ] (tons) [Conv] [Cu] [Yds]
equals 6.666667 cubic yards. Repeated
presses of this key, after a cubic entry
or conversion, toggles among tons,
pounds and kilograms.
[Conv] [%]
Weight per Volume — Used to set the
Weight per Volume. Can be pro -
grammed as Tons per Cubic Yard,
Pounds per Cubic Yard, or Kilograms
per Cubic Meter. Default is 1.5 Tons
per Cubic Yard. To set a different
weight per volume, for example, 2
8 – HeavyCalc™
To Next Page
Loading...
Need help?
General
