2U
C l
iU
2
5 2
2 2
p.
23 - Manual code:
FA00095-EN v.
4 - 08/2017 - © Came S.p.A. The contents of this manual may be changed at any time without prior notice.
User Associated command
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
Deleting a single user
Entering a user with an associated command
When entering/deleting users, the fl ashing numbers that appear, are numbers that can be used for other users you may wish to enter (maxi-
mum 25 users).
Select U 1
Press ENTER to confi rm.
Select a command to associate to the user.
The commands are:
- step-step (open-close) = 1;
- sequential (open-stop-close-stop) = 2;
- open = 3;
- partial opening/pedestrian = 4.
Press ENTER to confi rm...
... a number from 1 to 25 will fl ash for a few seconds
Send the code from the transmitter or other control device, such
as, a keypad selector or a transponder.
Associate the number to the entered user.
Select U 2.
Press ENTER to confi rm.
Use the arrow keys select the number of the user you wish to
delete.
Press ENTER to confi rm...
... Clr will appear on the screen to confi rm deletion.
To Next Page
Loading...
Need help?
General
