CAME ZE5 - Safety Devices Integration; Reopening Contact (NC); DIP Switch for Safety Device

LINE
-ENC+
ZE7
CONTROL
5A
BOARD
FUSE 5x20
V
W
U
E1
E3
10
10
11
11 1 2 3 5 7
C1
C1
FA
FA
DIR Delta-S
LINE
-ENC+
ZE7
CONTROL
5A
BOARD
FUSE 5x20
V
W
U
E1
E3
10
10
11
11 1 2 3 5 7
C1
C1
FA
FA
Delta

./ # .#


The data and information reported in this installation manual are susceptible to change at any time and without obligation to notify users.
Pag.
10
10 - Manual code:
319T92
319T92 ver.
2.0
2.0 11/2012 © CAME cancelli automatici s.p.a.
EN
Safety devices
C1 = (N.C.) contact for reopening while closing
- Input for safety devices like photocells, sensitive
edges and other devices that comply with EN
12978 regulations. While the door is closing,
opening the contact will invert movement until it is
fully openend.
If unused, set DIP-switch 7 to ON.