CAME ZE5 - Connecting Multiple Motors; Connecting Two Motors in Parallel; Encoder and End-Stop for Single Motor

UVWE1E3 2 FA
E
+
-
FA K E WVUF
󱤨
󱤩
The data and information reported in this installation manual are susceptible to change at any time and without obligation to notify users.
Pag.
16
16 - Manual code:
319T92
319T92 ver.
2.0
2.0 11/2012 © CAME cancelli automatici s.p.a.
EN
Connecting Two Motors
Should two motors be installed,
connect them in parallel.
Use terminals U, V and W of the
ZE5 control panel to connect both
motors.
 Connect the encoder and
the opening end-stop of a single
motor.
Red
Black