CAME ZE5 - Motor Torque Adjustment; Reducing Motor Torque; Increasing Motor Torque

AF
V
W
U
E1 E3
10 11 12357C1 FA
L1T
L2T
VA
VA
VB
VB
AF
V
W
U
E1
E3
10 11 12357C1 FA
VA
VA
VB
VB
L1T
L2T
VA
VA
VB
VB
The data and information reported in this installation manual are susceptible to change at any time and without obligation to notify users.
Pag.
20
20 - Manual code:
319T92
319T92 ver.
2.0
2.0 11/2012 © CAME cancelli automatici s.p.a.
EN
To reduce the motor torque, move
the Connector “A” terminal board to
Connector “B”.
To increase the motor torque,
isolate the black and brown wires
and insert a bridge as shown in the
diagram.
Connector “A”
Connector “B”
Adjusting the motor torque