Installing the Scanner 23
Interface Board
When connecting the scanner via USB, verify that the USB 2.0 interface
board you are using is one recommended for use with the scanner. The
recommended USB 2.0 interface boards are as follows:
SCSI Boards
When connecting the scanner via SCSI, verify that the SCSI board you are
using is one recommended for use with the scanner. The recommended SCSI
boards are as follows:
Recommended SCSI boards
Manufacturer : Adaptec
Models : AHA-2930U, AHA-2940AU, ASC-2915LP, ASC-
2930LP, ASC-19160, ASC-29160, APA-1480
Notice
When installing the SCSI board in your computer, please refer to the
computer user’s guide and follow the instructions provided
Note
● The APA-1480U is not supported by Windows NT 4.0 Workstation.
● Windows 2000 and Windows XP do not support synchronous transfer with
the ASC-2915/2930LP; therefore scanner throughput is slightly reduced.
(As of January, 2003.)
To Next Page
Loading...
