EasyManua.ls Logo

Canon EOS 100D - Charging the Battery

Canon EOS 100D
533 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
1
Remove the protective cover.
2
Attach the battery.
As shown in the illustration, attach the
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
3
Recharge the battery.
For LC-E12
As shown by the arrow, flip out the
battery chargers prongs and insert
the prongs into a power outlet.
For LC-E12E
Connect the power cord to the
charger and insert the plug into a
power outlet.
X Recharging starts automatically and
the charge lamp lights up in orange.
X When the battery is fully recharged,
the full-charge lamp will light up in
green.
It takes approx. 2 hours to fully recharge a completely
exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on
the ambient temperature and the battery’s remaining capacity.
For safety reasons, recharging in low temperatures (5
°
C - 10
°
C /
41
°
F - 50
°
F) will take longer (up to approx. 4 hours).
Charging the Battery
LC-E12
LC-E12E

Table of Contents

Other manuals for Canon EOS 100D

Related product manuals