4-3
Sending Documents
Specify the Destination Send the Document
Specify the fax number or e-mail
address with the numeric keys.
You can also specify the fax number or e-mail addresses
with one-touch keys, coded dial codes, or [Address Book]
key. (See “Specifying Destinations,” on p. 4-40.)
Press [Start].
When you set the documents on the platen glass, press
[ ] or [ ] to select the document size, then press
[Start] for each document. When scanning is complete,
press [OK] to start dialing.
T E L = 1 2 3
Ex.
F A X N U M B E R
You enter a wrong number when
specifying a fax number:
Go back to the wrong digit with [ ].
You enter a wrong character when
specifying an e-mail address:
Go back to the wrong character with
[ ], then press [Clear]. Or press and hold
[Clear] to delete the entire entry.
●
●
You want to cancel sending:
Press [Stop/Reset] on the operation panel.
When the <STOP KEY PRESSED> message
appears, press [OK].
When the <CANCEL?> message appears,
select <YES> with [ ].
●
To Next Page
Loading...
