4-29
Sending Documents
Storing/Editing Group Addresses
The destinations must be registered in one-touch keys, or coded dial codes beforehand.
Registering Group Addresses
1 Press [Additional Functions].
2 Press [ ] or [ ] to select <ADDRESS BOOK SET.>, then press [OK].
3 Press [ ] or [ ] to select <GROUP DIAL>, then press [OK].
4 Press [ ] or [ ] to select an empty one-touch key or coded dial code that
you want to set as the group address, then press [OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch key, or
[Coded Dial] followed by the desired three-digit code.
●
To Next Page
Loading...
