11-17
Troubleshooting
Message Description Action
MEMORY FULL The machine is full of jobs. – Print, send, or delete any
documents stored in
memory.
–
Divide the document stack
or data into a few parts and
try again one by one.
–
Send the document with
low resolution.
–
When this message appears
during using the ADF, the
scanning document stops
halfway. In this case, clear
the paper jam from the ADF.
–
The number of TX/RX
jobs that can be stored
in memory reached the
maximum.
– The maximum numbers
of jobs that can be stored
in memory are as follows
(Based on the condition that
the other party sends the fax
by the imageCLASS MF4690
with ITU-T No. 1 Chart
standard mode);
Up to 70 jobs for sending or
90 jobs for receiving, 95 fax
jobs including sending and
receiving, or 75 e-mail and
I-fax jobs for receiving.
Wait for the machine to send
any documents in memory.
Also print, send, or delete
any documents stored in
memory.
–
To Next Page
Loading...
