Machine Settings
12-30
ADJUST./CLEANING
MODE2 Sets the density of printouts becomes four-levels lighter than
normal condition.
6. SPECIAL MODE X Sets whether to prevent blur from appearing on the printouts
for print jobs from PCL driver.
When this setting is set to <ON>, the density of printouts may
become light.
ON
OFF
–
–
7. SPECIAL MODE Y Sets to enhance the fixing characteristics of toner under the
conditions of a low temperature environment When this setting
is set to <ON>, first copy time and the time to resume from the
sleep mode may take longer.
OFF
ON
–
–
To Next Page
Loading...
Need help?
General
