12-35
Machine Settings
SYSTEM SETTINGS
3. PRINT LIST Prints counter information.
Press [ ] to select <YES>.
If you do not want to print the list, press [ ] to select <NO>.
3. PDL JOBS W/OUT ID Sets if print jobs from computers with unknown IDs are
accepted or rejected.
ON Accepts print jobs from computers with unknown IDs.
OFF Rejects print jobs from computers with unknown IDs.
4. MANAGE USER ID Sets if the user ID management is used.
OFF
ON
–
–
5. NETWORK SETTINGS Sets the network setting. (See Chapter 6, “Network,” in the
Reference Guide.)
1. TCP/IP SETTINGS Sets TCP/IP network.
1. IP ADDRESS AUTO. Sets whether to automatically set an IP address.
ON Enables an IP address to the machine automatically.
1. DHCP (ON/OFF)
2. BOOTP (OFF/ON)
3. RARP (OFF/ON)
–
–
–
OFF Allocates an IP address to the machine manually.
2. IP ADDRESS Registers a fixed IP address to the machine. (See “Set the
Machine for Network Usage,” in the Starter Guide.)
3. SUBNET MASK Registers a fixed subnet mask to the machine.
4. GATEWAY ADDRESS Registers a fixed gateway address to the machine.
5. DNS SETTINGS Sets the DNS server settings.
1. PRIM. DNS SERVER Registers the primary server address.
To Next Page
Loading...
