12-41
Machine Settings
SYSTEM SETTINGS
8. POP PASSWORD Enters the password for access to the POP server (max. 32
characters).
9. POP INTERVAL Sets the interval you want the POP server to check for incoming
e-mail. If the interval is set to 0, the POP server is not checked
automatically (0MIN.–99MIN.).
8. STARTUP TIME SET. Sets the time period required to delay the startup of network
communications for the machine (0SEC–300SEC).
6. COMMUNICATIONS Sets the fax and e-mail communication.
1. E-MAIL SETTINGS Sets the e-mail communications.
1. MAX TX DATA SIZE Sets the maximum data size for outgoing e-mail messages. If
the e-mail message exceeds this data size limit, it is split up into
several e-mail messages before being sent (0MB-99MB).
2. DIVIDED OVER MAX Sets whether to divide a document into separate files when it is
sent if its size exceeds the data size you specify.
OFF
ON
–
–
2. FAX SETTINGS Sets the facsimile communication.
1. TX START SPEED Sets the transmission start speed for faxes.
(33600bps, 2400bps, 4800bps, 7200bps, 9600bps, 14400bps)
2. RX START SPEED Sets the reception start speed for faxes. (33600bps, 2400bps,
4800bps, 7200bps, 9600bps, 14400bps)
3. MEMORY LOCK Sets whether to receive and store all documents in memory
and not to print automatically. (See Chapter 4, “Sending and
Receiving,” in the Reference Guide.)
To Next Page
Loading...
