Cleaning the Printer
Important
•
If the Ejection Guide is dirty, it may soil the edge of the pap
er w hen the paper is
cut. We recommend cleaning the Ejection Guide even if it does not appear dirty,
because it m ay actually be covered with paper dust.
4
Plug the power cord into the outlet.
Cleaning Inside the Top Cover
Clean inside th e Top C over about once a month to maintain better printing quality and
help prevent problem s.
Also clean inside the Top Cov er in the following situations to ensure optimal operat ion.
•
If the p ri nted surface or the u nder side of paper is dirty after printing
•
After you have used u p a roll
•
After borderless p rinting
•
Afterprintingonsmallpaper
•
After printing on paper that generates a lot of cuttin g debris
•
If you have replaced the roll
•
After printing on paper that generates a lot of paper dust
Important
•
If the Platen inside the Top C over becomes dirty, it may soil the underside of paper.
We recommend always cleaning the Platen after bord e rless prin ting o r printi n g on
small paper.
•
If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is
cut. We recommend cleaning the Ejection Guide even if it does not appear dirty,
because it m ay actually be covered with paper dust.
39
To Next Page
Loading...
