Canon imagePROGRAF iPF710 User Manual

Replacing Ink Tanks
Compatible Ink Tank
An Ink Tank that can be used in the printer is labeled with a white letter "A" in a black
circle on the side. Request an Ink T
ank with the same label w hen you purchase a new Ink
Ta n k . F or mo re i nfo rm ati on,see " In k Tan ks." (→ P.81)
Precautions when handling an Ink Tank
Take the following precautions when handling an Ink Tank.
Caution
•
For safety, keep an Ink Tan k out of the reach of children.
•
If ink is accidentally ingested, contact a physician immediately.
Important
•
Before removing an Ink Tank f ro m the pouch for installation, shake it gently seven
or eight times. If you do not shake the Ink Tank, the ink may sedim ent, which may
affect printing quality.
•
Do not remove and shake an Ink Tank that has already been installed in the printer.
Ink may leak out.
•
Avoid dropping th e Ink Tank after removing it from the pouch. Otherwise, ink may
leak and cause stains.
•
TheremaybeinkaroundtheinkholesofInk Tank you remove. Handle an Ink
Tank carefully during replacement. The ink may stain clothing.
•
We recom mend using up an Ink Tank in the course of printing within six months
after breaking the seal. Using an old Ink Tank may affect the printing quality.
•
Do not remove the Ink Tank if the printer is not used for a long period (a month
or m or e ). Ink remaining in the pri nter m ay become clogged and cause of printing
problems.
•
Coverage may be uneven if you replace the ink during a print job.
31

Canon imagePROGRAF iPF710 Specifications

Printer Specifications

print resolution (max.)	2400 x 1200 dpi
line accuracy	±0.1% or Less
minimum line weight	0.02mm
number of nozzles	Matte Black: 5, 120 Nozzles, Other Colors: 2, 560 Nozzles per Color
droplet size	4 Picoliter
nozzle pitch (head resolution)	1200 dpi x Two Rows
print head swath	1.07 inch

Ink Specifications

ink type	Dye: Cyan (C), Magenta (M), Yellow (Y), Black (K); Pigment: Matte Black (MBK) – Two Channels
ink tank capacity	130ml per Color
number of colors	5

Media Specifications

media width (roll feed)	10" – 36" (254mm – 914.4mm)
media width (cut sheet)	8" – 36" (203.2mm – 914.4mm)
printable margins (roll feed)	All Sides: 0.12" (3mm) or 0" for Borderless
minimum printable media length (roll feed)	8.0" (203mm)
maximum print length (roll feed)	59' (18m)
maximum print length (cut sheet)	5.2' (1.6m)
borderless printing widths (roll media only)	10", 14", 16", 24", 36", B2 (20.28"/515mm), A1 (23.38"/594mm), B1 (28.66"/728mm), AO (33.11"/841mm)
media thickness (roll feed)	0.07 – 0.8mm (2.8 – 31.4mil)
media thickness (cut sheet)	0.07 – 0.8mm (2.8 – 31.4mil)
media core sizes	2" or 3" Core (2/3" Core Adapter Included)
maximum roll outer diameter	5.9" (150mm)

Power and Acoustic

power supply	AC 100–240V (50-60Hz)
power consumption (maximum)	140W or Less
power consumption (standby)	5W or Less (10W or less when IEEE1394 is mounted)
power consumption (power off)	1W or Less (Executive Order Compliant)
acoustic noise (operation)	52dB (A) or Less
acoustic noise (standby)	35dB (A) or Less
acoustic power	6.6 Bels or Less

Operating Environment

operational temperature	59 – 86 F° (15 – 30 C°)
relative humidity	10 – 80% (No Condensation)

Weight and Dimensions

printer dimensions (h x w x d)	59.3" x 34.3" x 43.1" / 1507mm x 871mm x 1094mm
weight (with stand)	Approx. 141 lb. / 64kg