8
Make your selection in the F Print Quality list.
9
Access the Page Setup pane.
10
Select and click a roll paper in the A Paper Source list.
11
Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, 10 in. (254.0mm).
Note
•
If the width of the roll loaded in the printer is not shown in
B Roll Width, click L Printer Information on the Main
pane to update the printer information.
12
Make sure the C Page Size setting matches the origi-
nal size as selected in C Paper Size in the Page At-
tributes dialog box—in this case, ISO A4.
13
Select the D Enlarged/Reduced Printing check box.
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
iPF760
User's Guide
Enhanced Printing Options Borderless Printing
108