Setting Item Description, Instructions
GL2 Set-
tings
Line &
Pen
Manager
Smoothing
•
If you choose Software
Operation is determined by the application. If nothing is
specified by the application, the result is as shown in the
figure.
Note: By default, this is a 72-sided figure
•
If you choose Smooth
ThickenFineLines Select On to print fine lines more distinctly.
AdjustFaintLines If fine lines are printed in colors that do not match the colors of
other shapes, selecting Off may help produce the expected re-
sults. However, lines in some colors may appear broken.
Proces-
singOp-
tion
Warning Select On to have any GL2-related warnings displayed.
PageSizeProcess1 Normally, the area available for printing excludes a margin re-
quired by the printer, and images are positioned accordingly.
Selecting On in this setting eliminates any misalignment of the
printing position if the image itself includes a border.
PageSizeProcess2 Selecting On will determine the paper size based on the image
rendering area.
GL2 Set Print Print GL2 settings information.
Interface
Setup
EOP Timer Specify the timeout period before cancellation of print jobs that
cannot be received by the printer.
TCP/IP IPv4 IPv4 Mode Choose whether the printer IP address is configured automati-
cally or a static IP address is entered manually.
Protocol DHCP Specify the protocol used to configure the IP address automati-
cally.
BOOTP
RARP
IPv4 Set-
tings
IP Address Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the net-
work subnet mask and default gateway.
Subnet Mask
Default G/W
DNS Set-
tings
DNS Dync update Specify whether DNS server registration is updated automati-
cally.
iPF760
Menu Settings
User's Guide
Control Panel Printer Menu
501
To Next Page
Loading...
Need help?
General
Weight and Dimensions
