After the Information dialog is displayed, under Roll Paper Width, select the same paper width as
that of the paper roll loaded in the printer and click OK.
5. Click Borderless Setting5.
When the Borderless Setting dialog box is displayed, place a checkmark next to Three-sided
Borderless, and then click OK.
6. Select a method for printing borderless6.
In the Borderless Printing Method tab, place a checkmark next to the Fit Paper Size option.
If the size of the document is different from the size of the paper you want to print on, select the paper
size you want to print on from Printer Paper Size.
7.
Complete the setting process
7.
Click OK.
If you print now, the document will be printed without margins on three sides to fit the paper size.
8.
Cut the right side of the paper
8.
Cut the margin on the right side of the paper with scissors after printing. Cut slightly to the inside of the
margin as the document is enlarged to extend slightly beyond the specified size.
To get the document to standard size, it is recommended to take measurements and cut in the correct
positions.
148
To Next Page
Loading...
Need help?
General
Weight and Dimensions
