Managing Colors
Color management (color calibration) corrects for variations in color tones due to differences between
printers and aging, and obtains continuously stable corrected color tones.
The color tones of this printer can be corrected by executing color calibration.
If you have multiple printers, you can make the color tones of the printers the same by executing color
calibration on each of the printers.
Execute Color Calibration
Executing color calibration improves color consistency by compensating for slight differences in how color
appears due to individual variations or aging among the printers.
You can use the operation panel to enable or disable the color calibration adjustment values, view the
calibration status, and configure notifications when color calibration needs to be executed.
You can also execute color calibration from Device Management Console.
See the following for details.
Device Management Console Guide
Checking When to Execute Color Calibration
You can use the progress bar on the computer screen to determine when to execute color calibration.
Use Device Management Console to view when to execute color calibration.
See the following for details.
Device Management Console Guide
Checking Color Calibration Execution Logs
You can check the paper name and the date and time which color calibration was executed for each
media type.
Use Device Management Console to view color calibration execution logs.
See the following for details.
Device Management Console Guide
Centrally Managing Multiple Printers
You can view the status of multiple network- and USB-connected printers.
You can also set up email notification if printer warnings or errors occur.
Use Device Management Console to manage the printers.
See the following for details.
Device Management Console Guide
570
To Next Page
Loading...
Need help?
General
Weight and Dimensions
