Auto maintenance settings
This item is displayed by selecting Printer settings after selecting (Setup) on the HOME screen.
Important
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
• Auto nozzle check•
Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic
nozzle checking.
• Nozzle check error display•
Enables/Disables displaying the nozzle check error.
• System Cleaning frequency•
Specifies the frequency of automatic system cleaning.
Note
• To maintain print quality, we recommend you select Short if you use the printer at a higher place.
• Print pattern after new head•
Selects whether you print an adjustment pattern after replacing the Print head.
359
To Next Page
Loading...
