◦ Wi-Fi setup◦
Select how to setup Wi-Fi.
▪ Easy wireless connect▪
Select if you specify the settings of the access point information to the printer directly from a
device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen
instructions of the connecting device for the setup procedure.
▪ Manual connect▪
Select when you perform settings for Wi-Fi manually using the operation panel of the printer.
▪ WPS (Push button method)▪
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected
Setup (WPS) push button method. Follow the on-screen instructions during setup.
▪ Other connection types▪
▪ WPS (PIN code method)▪
Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
Note
• Select Advanced to make detailed LAN settings.•
For the items that can be set, see the following.
Advanced
• Wireless Direct•
The following setting information on the Wireless Direct connection is displayed. (Some items are not
displayed depending on printer settings.)
Items Setting
Connection Enable / Disable
Network name (SSID) DIRECT-XXXX-TM-NNNN*1
Password XXXXXXXXXX
Frequency 2.4 GHz
Wi-Fi security WPA2-PSK (AES)
No. of printers connected now XX/XX
IPv4 address XXX. XXX. XXX. XXX
IPv4 subnet mask XXX. XXX. XXX. XXX
IPv4 default gateway XXX. XXX. XXX. XXX
IPv6 link-local address XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX
MAC address XX:XX:XX:XX:XX:XX
Printer name XXXXXXXXXXXXXXX
349
To Next Page
Loading...
