Set the password by using 4 to 32 characters.
The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
For security reasons, we recommend you use 8 and more alphanumeric characters.
7. When completion message appears, select OK.7.
Setting Standard User Password
For restricting the function for standard user, enable the standard user mode and set a standard user
password by following the steps below.
1.
Start up Remote UI.
1.
Start up Remote UI
2. Select Security.2.
The menus appear.
3.
Select Standard user mode settings.
3.
4. Confirm the message and select Yes.4.
5. Enter password and select OK.5.
Important
• The following character restrictions apply to the password:•
Set the password by using 4 to 32 characters.
The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
For security reasons, we recommend you use 8 and more alphanumeric characters.
6.
When completion message appears, select OK.
6.
459
To Next Page
Loading...
Need help?
General
Weight and Dimensions
