• Key algorithm•
Specify the signature algorithm and key information.
•
Specify the expiration date.
•
Enter the date you generated the server certificate on Valid from.
Enter the date the server certificate expires on Valid to.
•
Enter the common name.
•
On Common name, enter the IPv6 link-local address you checked in abbreviated form.
Note
•
When you enter the common name, add [ ] to each end of the abbreviation value of the
printer's IPv6 address.
•
Do not use a comma or make a space for the common name.
7.
Select Next.
7.
Enter Country, State or province, Locality, Organization and Organizational unit as required.
Enter the same information in Subject Alternative Names as in Common name.
8. Select Generate.8.
The server certificate starts to be generated.
When the server certificate has been generated, Generated a self-signed certificate. appears.
9. Select Restart LAN.9.
LAN will be restarted.
When LAN has been restarted, Printer status on Remote UI appears.
Note
• If you cannot access to Remote UI after you restart LAN, reload your web browser.
Checking Generated Server Certificate
1.
Select Security on Remote UI.
1.
2.
Select TLS server settings.
2.
3.
Select Check key and certificate.
3.
Make sure the issuer of the root certificate is displayed on Issued by, and the value you entered is
displayed on Common name on Subject.
471
To Next Page
Loading...
Need help?
General
Weight and Dimensions
