Canon imageRUNNER 1025 User Manual

12-13
Maintenance
Replacing the Drum Unit
Replacing the Drum Unit
When the message <REPLACE THE DRUM> appears on the display, replace the drum unit.
Do not throw used drum unit into open  ames, as they may ignite the toner remaining inside the unit, and result in burns or a  re.
If you use the machine without inserting the drum unit, <INSERT THE DRUM> appears on the display. In this case, turn OFF the
main power, and install the drum unit into the machine.
1
Open the left cover.
2
Holding the grips on the drum unit,
slightly lower and remove it from the
machine.
Do not touch the  xing assembly as it becomes
very hot during use.
3
Open the package of the new drum unit
and remove the protective packing
material (A).
4
Hold the unit by its grips on both sides.

Canon imageRUNNER 1025 Specifications

General

Print Technology	Laser
Print Speed	25 ppm
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
ADF Capacity	50 sheets
Maximum Paper Size	A4
Duplex Printing	Manual
Network Connectivity	Optional
USB Connectivity	USB 2.0
Fax Resolution	200 x 400 dpi
Paper Capacity	500 sheets
Functions	Print, Copy, Scan
Paper Size	A4, Letter
Memory	128 MB (standard)