Canon MARK II EOS 5D - Setting the Image-recording Quality

54
You can select the pixel count and the image quality. There are six JPEG
recording quality settings:
73, 83, 74, 84, 76 , and 86 . There
are three RAW recording quality settings:
1, D1 , and D2 . RAW
images must be processed with the provided software (p.56).
1
Select [Quality].
Under the [1] tab, select [Quality],
then press <0>.
2
Select the image-recording quality.
To select a RAW setting, turn the
<6> dial. To select a JPEG setting,
turn the <5> dial.
On the upper right, the “***M
(megapixels) **** x ****” number
indicates the recorded pixel count,
and [***] is the number of possible
shots (displayed up to 999).
Press < 0 > to set the selected quality.
Image-recording Quality Setting Examples
* If [–] is set for both RAW and JPEG, 73 will be set.
3 Setting the Image-recording Quality
73 only
D
2+74
1+73
1 only