EasyManua.ls Logo

Canon MultiPASS MP360 - Canon MP390 Errors Displayed on Screen

Canon MultiPASS MP360
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5
5-3
5.2 Errors Shown on the Display
5.2.1 User Error Message
0004-3247
Look for the applicable error message and execute the appropriate countermeasures.
"BLACK INK LOW"
Cause: The ink level in the black ink tank is low.
Solution: Replace the black ink tank. If the machine stops printing when copying or photo printing, you can continue
printing by pressing the [Set] key. However, note that ink may run out. If print quality deteriorates or the printout
is blank, replace the ink tank.
"BUSY/NO SIGNAL"
Cause: The receiving fax did not answer within 55 seconds. (T1 timer over)
Solution: Contact the other party and have them check their fax.You can try to send the document manually. For an
overseas call, add pauses to the registered number.
Cause: The touch tone/rotary pulse setting on your fax is incorrect.
Solution: Set your fax to the setting that matches your telephone line.
Cause: The other party is not using a G3 machine.
Solution: Contact the other party and have them send or receive the document using a G3 machine.
Cause: The other party's fax is not working.
Solution: Contact the other party and have them check their fax.
Cause: The telephone number you dialed is busy.
Solution: Try sending the document at a later time.
"CANNOT USE THIS CARD"
TURN OFF AND ON
Cause: You have inserted a memory card incompatible with the machine or a damaged memory card into the card
slot.
Solution: Remove the memory card from the slot, and then turn the power OFF and ON again.
"CARD READER BUSY"
Cause: You tried to start photo printing when the card slot was in use by the computer.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com

Table of Contents

Other manuals for Canon MultiPASS MP360

Related product manuals