Canon MultiPASS MP360 - Canon MP390 New SSSWs and Parameters

Chapter 4
4-16
4.4 New SSSWs/Parameters Added to This Model
4.4.1 Service Data
0002-0681
SSSW (Service Soft Switch settings)
The items registered and set by each of these switches comprise 8-bit switches. The figure below shows which
numbers are assigned to which bits. Each bits has a value of either 0 or 1.
F-4-8
Refer to the service data menu for the details of the service switches and the initial setup values of this machine.
Because this machine does not have any new additional service data, for further details of service data, refer to the
separate volume, "G3/G4 Facsimile Service Data Service Handbook (revised ver.1)".
Below are examples showing how to read bit switch tables.
F-4-9
SW01
00000000
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3
Bit 2
Bit 1
Bit 0
Service error code
Error dump list
Not used
Copy function
##300 series service error code
Not used
Not used
User setting restriction
Output
Output
No
Output
Setting possible
Function
0
1
2
3
4
5
6
7
Bit 1
0
Indicates that the
setting is "1".
Figures in boldface
are default settings.
in
Indicates that the
setting is "0".
Not Output
Not Output
Yes
Not Output
Setting resrticted
Download Service Manual And Resetter Printer at http://printer1.blogspot.com