Chapter 4
4-4
4.2 How to Clean Parts
4.2.1 How to Clean Parts
0002-0504
NOTE:
If the parts above are very dirty, wipe with a cloth moistened with IPA (isopropyl alcohol).
Precautions when Using IPA
When cleaning wit IPA, take care to prevent the IPA from splashing high-temperature parts. If IPA splashes high-
temperature parts, leave for at least three minutes to allow the IPA to evaporate.
4.2.2 Exterior
0002-0507
Main Unit Outer Covers
Wipe with a dry, soft cloth.
4.2.3 Scanning Unit
0002-0515
Document Glass
Open the pressure plate. Dampen a clean cloth and wring it thoroughly. Wipe the document glass with the cloth and
dry the glass well. You may use a mild detergent diluted with water if the glass is very dirty.
Document Cover
Open the pressure plate, and wipe with a dry soft cloth.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
