Chapter 4
4-15
#6 GENESIS (UHQ function settings)
Tampering with this setting may cause the scanned image quality to deteriorate. Do not change these settings.
F-4-7
NOTE:
If USER SW is selected from #8 CLEAR, the memory management of the user data is not cleared. If TEL or
SERVICE SW is selected, the memory management of the user data is cleared.
#8 CLEAR
#9 ROM
TEL
USER SW
SERVICE SW
NCU
SERVICE DATA
REPORT
COUNTER
ALL
Dialling data initialization
User data and service data #1
initialization
User data and service data #1
#6 to #7 initialization
#4 NCU setting data initializati
Data on system dump list initia
Data on activity report initializa
Total number of pages printed/
All user data, service data, acti
management data, and image
initialization (except COUNTE
(Data initialization mode
settings)
(ROM management)
Version No. and Checksum dis
TEST MODE
#10 CS SET
SERVICE REPORT
1.SERVICE & SYSTEM
2.SERVICE DATA
3.SYSTEM DUNP
MAIN:WLD-10-03
030217 DB03 FFFF
USB :05.12
CPU :WLD-01-01-CPU
021030 6511 FFFF
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
