EasyManua.ls Logo

Canon MultiPASS MP360 - Page 108

Canon MultiPASS MP360
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5
5-7
"PUT IN CARTRIDGE"
Cause: The printhead is not set.
Solution: Set the printhead.
"WASTED INK NEAR FULL"
Cause: The waste ink tank (which holds the ink used for print head cleaning) is nearly full.
Solution: If "CHECK PRINTER" message is displayed, refer to Cause and Solution of the error code ##343 and
replace the waste ink tank.
"WRONG CARTRIDGE"
Cause: The printhead (BJ cartridge) is not installed correctly.
Solution: Install the prithead (BJ cartridge).
Cause: The printhead (BJ cartridge) is defective.
Solution: Replace the printhead (BJ cartridge).
"MEMORY FULL"
Cause: The fax's memory is full because it has received too many documents.
Solutions: (1) Print out any documents which are stored in memory. Then start the operation again.
(2) If the memory contains any facsimiles you don't need, delete them.
(3) You cannot receive a fax was scanned with fine graphic images.
Cause: The fax's memory is full because you tried to send too many pages at once.
Solution: Divide the document and send each part separately.
Cause: The macine's memory is full because you tried to copy too many pages at once or a very detailed document.
Solution: Divide the document and copy each part separately.
Cause: Tried to print a large image data in the photo print mode.
Solution: Print the image data from the computer.
"WAIT COOLING"
Cause: During printing, the printhead may have become too hot.
Solution: Allow the machine to cool down. The machine will resume printing when it has cooled down.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com

Table of Contents

Other manuals for Canon MultiPASS MP360

Related product manuals