iTBY
standby)
\lTR
nitial rotation)
CFW
scanner forward)
SCRV
(scanner reverse)
FWM
Between when the power
switch is turned on and
when the Copy Start key is
pressed.
Between when LSTR is
over and when the Copy
Start key is pressed.
‘or about 3.5 set after the
:opy Start key is pressed.
while the scanner is moving
orward.
The distance traveled
forward varies depending
on the copy paper size ant
reproduction ratio.
The speed of forward
travel varies depending on
the reproduction ratio.
rVhile the scanner is moving
n reverse.
The speed of reverse
travel is about 3.4 times as
fast as forward travel in
DIRECT.
-or about 1 set after SCRV
or the last copy is over.
Waits until the Copy Start key
becomes valid.
. Removes the residual
charges from the photo-
sensitive drum and stabilizes
the sensitivity of the photo-
sensitive drum in preparatior
for cpying operation.
l Pre-heats the scanning lamp
and makes preparations unti
the drive intensity becomes
stabilized.
The scanning lamp illuminates
the original, and the reflected
optical image is projected on
the photosensitive drum by
way of mirrors and lenses.
The scanner is returned to the
home position in preparation
for the next copy run.
The last copy paper is
discharged.
Table 3-101
1
E
E
F
I
,
I
I 1
1:
c
t
i
! I
t
g
F
Remarks /
-he pick-up signal is
lenerated, and the firs
sheet of copy paper is
xcked up.
-he registration signal
s generated, and the
:opy paper is moved
o the transfer
assembly.
f in continuous mode,
he pick-up signal is
generated, and copy
japer is picked up.
3-10
COPYRIGHT 0 1995 CANON INC.
CANON NP6012/NP6012F/NP6212 REV.1 SEPT. 1995 PRINTEDIN JAPAN (IMPRIME AU JAPON)
To Next Page