Setting the Print Style
After setting the print style, select the image(s) to print. The
following print settings can be selected.
*Default setting
_ Standard* Prints one image per page.
Index Prints the selected images together at a
Print Type reduced size in an index format.
II[] Both Prints the images in both the standard and
index formats.
[_ Date (On/Oft _) Adds the date to the print.
[] File No. (On/Off*) Adds the file number to the print.
Clears all print settings after the images
Clear DPOF data (On*lOft') )[int.
Turn the mode dial to [] (Playback)_ []
(Print) Menu_[Print Settings].
See Menus and Settings (p. 23).
Select [Print Type], [Date], [File No.] or
[Clear DPOF data] and then specify the set-
tings.
• The Date and File No. settings change according to the
Print Type as follows.
- Index
[Date] and [File No.] cannot be set to [On] at the same time.
- Standard or Both
[Date] and [File No.] can be set to [On] at the same time,
however, the printable information may vary between
printers.
To Next Page
Loading...
