86
You can delete portions of recorded movies.
* When the shooting interval is 1 sec.
**When the shooting interval is 2 sec.
Select [] (Edit) in the
movie control panel and
press @.
eThe movie editing panel and the
movie editing bar will display.
Movie Editing Panel
Movie Editing Bar
Use the ÷ or _ button to select [] (Cut
Beginning) or [] (Cut End) and the _ or
button to specify the cut point( I ).
eTo check a temporarily edited movie, select [] (Play) and
press the FUNC./$ET button.
eSetecting [] (Exit) cancels the edit and restores the movie
control panel.
Select [] (Save) and press _.
Select [New File] or [Overwrite] and press _.
e[New File] saves the edited movie
under a new file name. The pre-edit
data is left unchanged.
Note, if you press the FUNC.ISET
button while saving the movie,
saving is canceled.
e[Overwrite] saves the edited movie
with its original name. The pre-edit data is lost.
eWhen there is not enough space left on the memory card,
only [Overwrite] can be selected.
To Next Page
Loading...
