Thiscameraisequippedwithapowersavingfunction.Thepower
willshutoffinthefollowingcircumstances.Pressthepowerbutton
againtorestorepower.
Shooting Mode Powers down approximately 3 minutes after the last
control is accessed on the camera. The LCD monitor
automatically turns off 1 minute* after the last control
is accessed even if [Auto Power Down] is set to [Off].
Press any button other than the power button or
change the camera orientation to turn the LCD
monitor back on.
Playback Mode Powers down approximately 5 minutes after the last
Connected to a Printer control is accessed on the camera.
* This time can bechanged.
• The power saving function will not activate during a slide
show or while the camera is connected to a computer.
• The power saving function settings can be changed (p. 26).
i
5"
t-"
f.Q
t_
3
I
O
"o
19
To Next Page
Loading...
