i Troubleshooting
E_
Power is not turned on. • Press the power button (Basic Guide
p. 10).
Memory card slot/battery eConfirm that the memory card slot/
cover is open. battery cover is securely closed
(Basic Guide p. 8).
Battery charge insufficient elnsert a fully charged battery into the
to operate camera camera (Basic Guide p. 7).
("Change the battery eUse the AC Adapter Kit ACK-DC30
pack" message displays). (sold separately) (p. 134).
Poor contact between ePotish the terminals with a soft
camera and battery cotton swab before charging or
terminals, using the battery (p. 130).
The camera's horizontal/ eThe camera's orientation
vertical orientation was mechanism is operating. There is no
changed, malfunction.
L','|;I'_ITI[:h'l_l i _I_,vL=]i I_-1[_ I :.]il
The SD memory card's
and SDHC memory
card's write protect tab is
set to "Write protect".
The built-in rechargeable
lithium battery charge is
low.
• When recording to, erasing from or
formatting the memory card, slide
the write protect tab upward (p. 132).
• Recharge the built-in battery
immediately (Basic Guide p. 9).
116
To Next Page
Loading...
