Function
Digital Tele-Converter
Evaluative
Metering CenterWeightedAvg.
Method
Spot
Exposure Compensation
I_1 aM
[] [] [] _ []Dm[]ml_m'_
[]m
.....!!_1!! _ili!!_!ii!!i_!i!i!i!!iiii!!_ill
O O O O O
0 (2 o
.....o_ - o<_>
Exposure Shift 0 (8
Long Shutter o p. 57
White Balance _/_3) _(_3 _(_3) p. 59
My Colors ..... - _)!") p. 62
Save Original ...... - p. 68
ISO Speed _(13 _(13) _(13) _(13 p. 69
Auto ISO Shift(_6) p. 70
Auto Rotate p. 73
Auto Category - p. 24
Disp. Overlay - p. 41
IS Mode p. 32
Set _,_, button p. 71
O Setting available. (O Default setting)
A Setting can only be selected for the first image. (A Default setting)
(Shaded Area):Setting is retained even when the camera power is shut off.
_m
(1) For u,, (Movie) recording pixels and frame rates, see p. 45.
(2) Cannot be selected in Long Shutter mode.
(3) Default flash settings are as follows.
[] [] [] IM[] [] _: Auto,i_1:FlashOn,[] [] _1:FlashO_
(4) Cannot be set in the _"], [] or [] mode.
(5) Cannot be set in the [] mode.
(6) In the [] or [] mode, this is set to [On]. (It cannot be configured to the [Oft] setting.)
(7) The Macrotlnfinity modes cannot be selected when the camera is in the [] or [] mode.
(8) Cannot be selected in the [] or [] mode.
(9) Can only be set when the flash setting is [On] in the [] mode.
(10) [Off] cannot be selected.
(11) Can only be set and used in the [] mode.
(12) The [] mode cannot be used with this function.
(13) Automatically set by the camera.
(14) Only [] or [] can be selected.
(15) [] and [] cannot be selected in Long Shutter mode.
(16) Cannot be used with [], [] or []. B
(17) Only [Grid Lines] can be used in the _ mode.
(18) In the [] mode, this function is fixed to the ]Shoot Only] option.
(19) The [Continuous] and [Panning] " =m
options cannot be selected in •• mode.
Page
p. 33
p. 55
p. 56
p. 44
To Previous Page
Loading...
