ii_i Aimii;e_ame_a;_ihaiii';_-o_.inai"_i_...........................
appears at the center of the LCD monitor
and press the ÷ button,
eOnly one color can be specified.
eYou can use the * or 4, button to specify the range of cot-
ors that are swapped.
• -5: Only takes the color that you want to swap
• +5: Also takes colors close to the one that you want to
swap
Aim the camera so t'ilat thedes ired c'oior
: appears at the center of the LCD monitor
and press the + button,
• Only one color can be specified.
The default setting for color swap mode changes green into
white.
You may not obtain the expected results if you use the
flash.
The colors specified in the color swap mode and the color
range are retained even if the camera's power is turned off.
o
&
67
To Next Page
Loading...
