Canon PowerShot SX160 IS

Initial Preparations
_ Display Language
The display language can be changed as needed.
iI _,_ _"_ i I
iiiiiiiiiiii
iiiiiiiiiiii
Enter Playback mode. iiiiiiiiiiii
Pressthe<[]>butteo iiiiiiiiiiii
iiiiiiiiiiii
iiiiiiiiiiii
;;;;;;;;;;;;
;_;;;!!!;_Access the setting screen, iiiiiiiiiiii
.........._ Press and hold the <___> button, and
then immediately press the <MENU>
button, iiiiiiiiiiii
,;;::i:ii!Set the display language, iiiiiiiiiiii
Press the <A><v><_><_,> buttons or iiiiiiiiiiii
turn the <_!_J:>dial to choose a language,
andthenpressthe<@>button, iiiiiiiiiiii
Oncethedisplaylanguagehasbeenset,
the setting screen is no longer displayed.
_;, The current time is displayed if you wait too long in step 2 after pressing
the <@> button before you press the <MENU> button. In this case,
press the <@> button to dismiss the time display and repeat step 2.
You can also change the display language by pressing the <MENU> button
and choosing [Language @'_-]on the [tl'] tab.
19