Common, Convenient Features
@ Using the Self=Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Configure the setting.
Follow step 1 on _[_50 and choose
[C_].
Once the setting is complete, [_] is
displayed.
Follow step 2 on _50 to shoot.
@Customizing the Self=Timer
You can specify the delay (0 - 30 seconds) and number of shots (1 - 10).
, Choose [_].
Following step 1 on _50, choose
[_] and press the <MENU>button
immediately.
Configure the setting.
Press the <,,L><v> buttons to choose
[Delay] or [Shots].
Press the <4><_> buttons or turn the
<_i_ii_>dial to choose a value, and then
press the <@> button.
Once the setting is complete, [_] is
displayed.
Follow step 2 on _50 to shoot.
51
To Next Page
Loading...
