Shooting (Smart Auto)
® Still Images
A flashing L[CJJ]ic°n warns that images are m°re likely t° be blurred
by camera shake. In this case, mount the camera on a tripod or
take other measures to keep it still.
If your shots are dark despite the flash firing, move closer to
the subject. For details on the flash range, see "Specifications"
(_203).
The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see "Specifications" (_203).
To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
A blinking [_.] icon displayed with the message [Charging the flash]
when you attempt to shoot indicates that shooting is not possible
until the flash has finished recharging. Shooting can resume as
soon as the flash is ready, so either press the shutter button all the
way down and wait, or release it and press it again.
® Movies
(_) Keep your fingers away from the
_' \'h'_:*7,, _ microphone while shooting movies.
"--_-/ Blocking the microphone may prevent
..... _ audio from being recorded or may
cause the recording to sound muffled.
Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
Audio is recorded in stereo.
45
To Next Page
Loading...
