Image Customization Features
Red-eye that occurs in the flash photography can be automatically
corrected as follows.
Access the [Flash Settings]
= screen.
_"_ Press the <MENU> button, choose [Flash
Settings] on the [0] tab, and then press
the <@> button (_38).
Configure the setting.
Choose [Red-Eye Corr.], and then
choose [On] (_[_38).
Once the setting is complete, [@] is
displayed.
To restore the original setting, repeat this
process but choose [Off].
(_ Red-eye correction may be applied to image areas other than
eyes (if the camera misinterprets red eye makeup as red pupils,
for example).
You can also correct existing images (S_138).
You can also access the screen in step 2 when the flash is up by pressing
the <_> button and immediately pressing the <MENU> button.
56
To Next Page
Loading...
