Shooting (Smart Auto)
Shoot.
Shooting Still images
€Focus.
Press the shutter button halfway. The
camera beeps twice after focusing, and
green frames are displayed to indicate
image areas in focus.
Several green frames are displayed when
multiple areas are in focus.
If [Raise the flash] appears on the screen,
press the <_.> button to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
@Shoot.
Press the shutter button all the way
down.
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
Keep the camera still until the shutter
sound ends.
Your shot remains displayed on the
screen for about two seconds.
Even while the shot is displayed, you can
take another shot by pressing the shutter
button again.
43
To Next Page
Loading...
