EasyManua.ls Logo

Canon PowerShot SX160 IS

Canon PowerShot SX160 IS
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shooting Range and Focusing
The focal length of the lens can be increased by approximately 1.6x or 2.Ox.
This can reduce camera shake because the shutter speed is faster than it
would be if you zoomed (including using digital zoom) in to the same zoom
factor.
Press the <MENU>button, choose
[Digital Zoom] on the [O] tab, and then
choose the desired option (_38).
The view is enlarged and the zoom factor
is displayed on the screen.
(_ The digital tele-converter cannot be used with digital zoom
(_49) and AF-point zoom (_60).
The respective focal lengths when using [1.6x] and [2.0x] are 44.8 -
716.8 mm and 56.0 - 896.0 mm (35mm film equivalent).
The shutter speed may be equivalent when you move the zoom lever all the
way toward <F_3>for maximum telephoto, and when you zoom in to enlarge
the subject to the same size following step 2 on [._49.
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
92
Press the <MENU>button, choose
[AF Frame] on the [O] tab, and then
choose the desired option (_38).

Table of Contents

Other manuals for Canon PowerShot SX160 IS

Related product manuals