To Next Page
M
Mckenzie CrawfordSep 8, 2025
Why are the playback controls inactive on my Canon DVR?
- TtorreskatherineSep 9, 2025
Move the Playhead away from the Live position to activate the Playback controls.
Why are the playback controls inactive on my Canon DVR?
Move the Playhead away from the Live position to activate the Playback controls.
Why is Canon DVR Viewer configuration slow on Windows XP/Vista?
Make sure you register no more than 10 camera servers for one storage server. If you register more than 10 camera servers to one storage server, use Windows Server 2003/2008.
Why is live video not displayed on Canon DVR using Windows XP/Vista?
Ensure that you connect no more than 10 camera servers to one viewer. If you connect more than 10 camera servers to one viewer, please use Windows Server 2003/2008.
What to do if Canon DVR cannot save video because no data could be found?
Check that the selected segment of video has recorded footage.
Why are Canon DVR Camera Servers not displayed in the Camera Summary window?
Only Camera Servers associated with the item selected on the [Storage Servers] tab or the [Locations / Zones] tab will be shown in the list.
Information on legal considerations for camera use and monitoring in various regions.
Details regarding audio performance, potential interruptions, and connection requirements.
Set up administrator password, network IP address, subnet mask, and gateway settings.
Adjust video capture size, quality, shutter speed, focus, and Day & Night mode.
Manage logs, view settings, reboot the camera, and restore factory default configurations.
Steps to launch the VBAdmin Tools application and establish a connection to the camera.
Create and register panorama images for camera preview and setting camera presets.
Visually set and manage camera presets and home positions using a panoramic preview.
Establish a connection to the camera using the NC Viewer interface.
Adjust camera angle, zoom magnification, and other properties via the NC Viewer.
Procedure for managing the list of cameras accessible through the NC Viewer.
Functionality to switch between different camera viewers or cameras.
Guidance on diagnosing and resolving common problems with the camera and software.
Procedure to reset all camera settings to their original factory default values.
Correcting camera head misalignment by reinitializing its default position.
General| Digital Zoom | 12x |
|---|---|
| Maximum Resolution | 640 x 480 |
| Frame Rate | Up to 30 fps |
| Network Interface | 10Base-T/100Base-TX (RJ-45) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Camera Type | PTZ |
| Image Sensor | 1/4" CCD |
| Effective Pixels | Approx. 340, 000 pixels |
| Maximum Aperture | F1.6 (Wide) to F3.5 (Tele) |
| Video Compression | MPEG-4 |
| Protocols | TCP/IP, HTTP, FTP, SMTP, DHCP, DNS, NTP |
| Power Supply | 24V AC |
