List of Log Messages
151
7
Appendix
System Messages
S001 System started [info]
S002 System settings changed [info]
S010 Event service started [info]
S011 Event service shut down [info]
S012 External device service started [info]
S013 External device service shut down [info]
S014 Timer service started [info]
S015 Timer service shut down [info]
S070 Change to SSL certificate [info]
S302 Error on saving settings [err]
S303 Error on saving settings [err]
S307 Error on saving settings [err]
S310 Working error in event service [err]
S311 Working error in external input/output service
[err]
Description starting paramd (S001)
Meaning Parameter management module started.
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
Description starting event (S010)
Meaning The event service was started.
Description shutdown event (S011)
Meaning The event service was shut down.
Description starting extio (S012)
Meaning The external device input/output service
was started.
Description shutdown extio (S013)
Meaning The external device input/output service
was shut down.
Description starting timer (S014)
Meaning The timer service was started.
Description shutdown timer (S015)
Meaning The timer service was shut down.
Description ssl: succeeded to %1 certificate (S070)
%1 generate | load | delete | restore
Meaning A certificate was generated/loaded/deleted/
restored
Countermeasure
None
Description Can’t update system settings (S302)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
Description Can’t update files of system settings (S303)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
Description (vbadmin.c XXX) Can't update system
settings (S307)
Meaning An error generated while the settings were
saved by the setup protocol. Setting could
not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area, etc.
Description cannot work event [%1] [%2] [%3] (S310)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the event service
was running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work extio [%1] [%2] [%3] (S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external input/
output device service was running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
To Next Page
Loading...
