Canton Sound M User Manual

10
English
Unpacking Running in
Unpack the box carefully and check that all the following parts
are present:
Lieferumfang:
• 1x Sound M
• 1x Smart-remote
• 1x Power cable
• 1x High-Speed-HDMI®-cable (3m)
• 1x Optical digital Audiocable (1�5m)
• 1x Short manual
• 4x Equipmentfeet large (20mm)
• 4x Equipmentfeet small (12mm)
Running-in phase until the development of the
maximum sound properties: 15–20 operating hours.
• Please listen at normal volume during this time
• Avoid extremely high levels
• Listen to a variety of audio material
Setting up the
remote control
The remote control comes with a
battery already installed� Simply
remove the protective film to
activate� When replacing the
battery ensure that it is correctly
inserted according to the polarity
markings (+/–)�
Only use the battery specified for
this system (CR 2032)�
CR 2032
OPEN CLOSE
Anschließen
Place the Sound M in the desired location and connect it to the
power input using the power cord� Make sure that your TV is
plugged in�

Canton Sound M Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDMI in	3
Bluetooth version	5.0
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Woofer diameter	50 mm
Tweeter diameter	19 mm
Crossover frequency	3000 Hz
Woofer diameter (imperial)	2 \
Tweeter diameter (imperial)	0.75 \
Cables included	AC, HDMI, Optical
Display type	LED
Product color	Black
Power consumption (standby)	0.4 W

Weight and Dimensions

Depth	100 mm
Width	725 mm
Height	65 mm
Soundbar weight	4000 g