Canton Sound M User Manual

3
37
English
Bluetooth Reset [BRE]
This function is to delete all Bluetooth
®
wireless technology related settings and paired devices stored on the Sound M and reset the system to
factory settings�
Caution: ALL settings you have made and stored on the Soundbar regarding the BT audio module will be deleted�
To perform the reset please proceed as follows:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button�
3
Use the " " or " " button to select the menu item Bluetooth Setup [BT] and confirm with the "OK" button�
4
Use the " " or " " button to select the menu item BT Reset [BRE] and confirm with the "OK" button�
The menu BT Reset is displayed and the status indication shows "No", the display shows [NO]�
5
If you want to cancel the reset precedure, press the "OK" button or press the "M" button�
6
If you want to perform the reset, select "Reset all" using " " or " " key and press the "OK" button� The display shows [YES]�
7
The OSD shows “Please Wait”, the display still shows [YES]. After a few seconds the Sound M jumps back to the menu "Bluetooth Menu" [BT]�
8
Press the "M" button to exit this menu item�
Autoplay [APL]
If this function is activated [ON], the playback of a previously connected device with Bluetooth® wireless technology will start automatically
when the Sound M is switched on� This starts the playback of the recently opened media player app (music player) on the (mobile) device�
Do the following to activate resp� deactivate this function:
1
To enter the menu, press the "M" button�
2
Use the " " or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button�
3
Use the " " or " " button to select the menu item Bluetooth Setup [BT] and confirm with the "OK" button�
4
Use the " " or " " button to select the item AutoPlay [APL] and confirm with the "OK" button�
5
Select the wanted parameter [ON] resp� [OFF] using the "+" or "–" button�
6
Press the "M" button to exit this menu item�
Note: Depending on the operating system of the (mobile) device and the app, the app must run in the foreground or at least in the
background� If there is no app or one that does not support background operation, playback will not start�

Canton Sound M Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDMI in	3
Bluetooth version	5.0
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Woofer diameter	50 mm
Tweeter diameter	19 mm
Crossover frequency	3000 Hz
Woofer diameter (imperial)	2 \
Tweeter diameter (imperial)	0.75 \
Cables included	AC, HDMI, Optical
Display type	LED
Product color	Black
Power consumption (standby)	0.4 W

Weight and Dimensions

Depth	100 mm
Width	725 mm
Height	65 mm
Soundbar weight	4000 g