Canton Sound M User Manual

34
English
5
Now select the speaker you want to pair and press "OK" to start the pairing process�
The Status indication should change to Pairing and the LED display indicates [PIR]�
6
Connect the (slave) speaker you want to pair to the mains and – if applicable – switch this speaker on at the power switch�
If the speaker is in stand by mode, turn it on by pressing the power button on the remote control�
Caution: The maximum time between pressing the OK button to start the pairing process and turning on the slave speaker is 30 seconds�
7
Approx� 10 – 20 seconds after switching on the slave speaker the displays should show [CON] resp� "Connected" at the OSD� From now on the display of the
(slave-)speaker and the display of the Sound M are in sync�
8
If "fail" appears in the OSD resp� [FAI] appears in the display, repeat steps 4 – 7 and make sure that…
a�) the desired slave speaker was disconnected from the mains for at least 30 seconds�
b�) not more than 30 seconds have been passed between pressing the OK button and witching on the slave speaker�
c�) the distance between the two speakers (soundbar and slave speaker) may not exceed 10 m and they are in the same room�
9
To pair a further speaker resp� a subwoofer, please repeat steps 4 – 7�
Caution: Should you have performed the above steps, never repeat them with the Sound M (master speaker) switched off, as this will automatically
designate a new master speaker and would prevent the previous slave speakers from connecting to the previously designated Sound M�
Note: In connection with some Canton Smart products (for example like the Smart Connect 5�1) the Sound M can be used as pure wireless
Center-speaker� The Sound M will then be controlled by that particular Smart product� Please inform yourself about the required wireless
pairing process in the manual of that particular Canton Smart product�
Wireless Reset [WRE]
This functions allows you to delete all stored settings and paired Smart speaker and/or Smart subwoofer (slave speaker) connections of the wireless
audio module of the Sound M and in this way reset the wireless module�
Caution: All settings and paired Smart speakers / Smart subwoofer that have been made according to the wireless audio module in the
Sound M will be deleted�

Canton Sound M Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDMI in	3
Bluetooth version	5.0
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Woofer diameter	50 mm
Tweeter diameter	19 mm
Crossover frequency	3000 Hz
Woofer diameter (imperial)	2 \
Tweeter diameter (imperial)	0.75 \
Cables included	AC, HDMI, Optical
Display type	LED
Product color	Black
Power consumption (standby)	0.4 W

Weight and Dimensions

Depth	100 mm
Width	725 mm
Height	65 mm
Soundbar weight	4000 g