Canton Sound M User Manual

3
27
English
You can change the default assigned name of an input to suit your actual connected source device� It is also possible to deactivate (physical) inputs so that they
are no longer displayed when switching through, which allows a faster selection of the input� The name for the input BT (Bluetooth
®
) can not be changed�
To change the name and/or deactivate the input proceed as follows:
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button�
3
Select the item Input Config [INP] using the " " or " " button and confirm with the "OK" button�
4
Then select the wanted inputy with the " " or " " button and press the "OK" button�
You can choose from the following predefined designations using the "+" or "–" button:
“ – – – ” (input disabled), TV, BDB, SAT, CD, DVD, CAM, REC, PAD, POD, TAB, TUN, DAB, PS, VCR, ATV, PC, AUX�
After selecting the name, press the "OK" button� �
5
To assign a name to another input, repeat steps 4 to 6�
6
To leave this menu item, press the "M" button�
Caution: • Should you assign a name to an input that is already assigned, the input previously assigned with this name will be deactivated (“ – – – “)�
To continue using this input, you must assign a different name� Each source name can be assigned only once�
Notes: • Inputs which have been deactivated “ – – – ” are no longer displayed when selecting the inputs (input buttons " " or " ")�
This simplifies the selection of the desired input�
• The name for the Input [BT] (Bluetooth
®
) can not be changed�
Input Select [SEL]
If the Input Select function is set to Auto [AUT], the Sound M automatically changes to the optical, coaxial, analog resp� BT input as soon as the sig-
nal disappears at the currently selected signal input and an input signal is detected at one of the other inputs of the Soundbar�
If Manual [MAN] is selected, the inputs must be selected manually via the remote control using the " " or " " button�
By default this function is deactivated�

Canton Sound M Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDMI in	3
Bluetooth version	5.0
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Woofer diameter	50 mm
Tweeter diameter	19 mm
Crossover frequency	3000 Hz
Woofer diameter (imperial)	2 \
Tweeter diameter (imperial)	0.75 \
Cables included	AC, HDMI, Optical
Display type	LED
Product color	Black
Power consumption (standby)	0.4 W

Weight and Dimensions

Depth	100 mm
Width	725 mm
Height	65 mm
Soundbar weight	4000 g