Canton Sound M User Manual

16
English
Preset Buttons 1-3 (Presets)
The Sound M is able to assign three memory buttons with „presets“� Settings like volume, selected input and settings in the Speaker Setup [SPS]
menu (sound settings, etc�) can be stored� The memory buttons can be operated via the Smart remote control�
Practical tip:
• We recommend that you store the settings you have made in the loudspeaker menu during the initial set-up of the Sound M, e�g� regarding
loudspeaker levels and distances, sound settings, etc�, to one of the three preset buttons so that your settings are not overwritten by the
factory (neutral) settings if you accidentally press one of the preset buttons�
To store (sound)settings, please proceed as follows:
1
Please apply the desired settings regarding volume, sound, input, etc� and press and hold the memory button 1, 2 or 3 until the corresponding
number [P1], [P2] or [P3] is shown in the display and no longer flashes�
2
To recall the settings from these presets, please press the corresponding button 1, 2 or 3 briefly� The settings are then called up�
Note:
• To delete the settings from a preset button, please press and hold the relating button for 10 seconds until
the corresponding preset [P1], [P2] or [P3] is shown in the display rapidly flashing�

Canton Sound M Specifications

General

Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	300 W
Audio output channels	2.1 channels
Audio Return Channel (ARC)	Yes
Wi-Fi	-
HDMI in	3
Bluetooth version	5.0
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Woofer diameter	50 mm
Tweeter diameter	19 mm
Crossover frequency	3000 Hz
Woofer diameter (imperial)	2 \
Tweeter diameter (imperial)	0.75 \
Cables included	AC, HDMI, Optical
Display type	LED
Product color	Black
Power consumption (standby)	0.4 W

Weight and Dimensions

Depth	100 mm
Width	725 mm
Height	65 mm
Soundbar weight	4000 g